manual
4
TYPES OF INSTALLATION:
This beverage cooler has been designed for free-standing or built-in ŝŶƐƚĂůůĂƟŽŶ In every case, there
must be adequate ǀĞŶƟůĂƟŽŶ and access for service
Free-standing /ŶƐƚĂůůĂƟŽŶ
A free-standing ŝŶƐƚĂůůĂƟŽŶ will allow you to install the beverage cooler in almost any place you
desire You must follow the stated instrucƟŽŶs for electrical requirements and leveling the beverage
ĐŽŽůĞƌ
Built-in /ŶƐƚĂůůĂƟŽŶ
A recessed installaƟon will allow you to install the beverage cooler under a counter or in a kitchen
cabinet provided the clearance space requirements around the beverage cooler are ĨŽůůŽǁĞĚ It is
necessary to allow adequate venƟůaƟon space around the unit (make sure there is at least some
ǀĞŶƟůĂƟŽŶ room for the back of the ƵŶŝƚͿ The following ĂĚĚŝƟŽŶĂů items must be observed:
1 Place the beverage cooler in front of the ŝŶƐƚĂůůĂƟŽŶ ůŽĐĂƟŽŶ
2 Adjust the feet and place the unit ŇĂƚ on the ŇŽŽƌ or on a plĂƞŽƌŵ depending on your ŝŶƐƚĂůůĂƟŽŶ
requiremenƚƐ
3 If the electrical outlet for the beverage cooler is behind the cabinet, plug in the beverage
ĐŽŽůĞƌ
4 Push the beverage cooler into ƉŽƐŝƟŽŶ
InstallaƟon Clearance Requirements:
When installing the beverage cooler under a counter, follow the recommended spacing dimensions shown
• To ensure proper service access and veŶƟůĂƟŽŶ allow between 1 - 2 inches of clearance at the back as shown in
the ĚŝĂŐƌĂŵ
• The installaƟon should allow the unit to be pulled forward for servicing, if necessary
• A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with NaƟŽŶĂů Electrical Code
and local codes and ordinances, is requiƌĞĚ
Warning: DO NOT install the beverage cooler behind a closed cabinet dooƌ
Important: Once you are ready to install the unit in a cabinet or directly on the Ňoor, you must adjust the
feet to level the beverage ĐŽŽůĞƌ
Wall
2-1/4”
Min.
•AŶŝŶƐƚĂůůĂƟŽŶŶĞdžƚƚŽĂǁĂůůǁŝůůƌĞƋƵŝƌĞĂŵŝŶŝŵƵŵϮͲϭϰĚŽŽƌĐůĞĂƌĂŶĐĞƚŽĂĐĐŽŵŽĚĂƚĞƚŚĞŚĂŶĚůĞ
1”- 2”