OmniSenseTM User Manual ZephyrTM Performance Systems
CONTENTS ABOUT THIS MANUAL GETTING STARTED CONTENTS (1/4) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS ABOUT THIS MANUAL About This Manual..................................................................5 GETTING STARTED What’s in the Box What’s In The Box....................................................................
CONTENTS ABOUT THIS MANUAL GETTING STARTED CONTENTS (2/4) SYSTEM OVERVIEW SYSTEM SETUP Speed Zones.......................................................................101 LIVE OPERATIONS Connection To Cloud Portal ANALYSIS OPERATIONS Connection to Cloud Portal.............................................
CONTENTS ABOUT THIS MANUAL GETTING STARTED CONTENTS (3/4) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING Default Widgets Forecast................................................................................201 My Status..............................................................................202 Team Status.........................................................................203 Athlete Status..........................................................
CONTENTS ABOUT THIS MANUAL GETTING STARTED CONTENTS (4/4) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS FITNESS PARAMETERS Intensity & Load ANALYSIS OPERATIONS Overview...............................................................................332 ANALYSIS IMPACT PROCESSING Interpreting Graphs ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAMETERS APPENDICES EULA SUPPORT INDEX Average Physiological vs.
CONTENTS ABOUT THIS MANUAL GETTING STARTED ABOUT THIS MANUAL SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS About This Manual This manual provides comprehensive instructions on all aspects of setup, configuration and operation of ZephyrTM Performance Systems PSM (physiological status monitoring) training hardware and ZephyrTM OmniSenseTM software. LOG DATA This is an interactive PDF document.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED WHAT’S IN THE BOX (1/2) > What’s in the Box > Software Installation SYSTEM OVERVIEW What’s In The Box SYSTEM SETUP Items which will be shipped: LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ∙ Shipping List Match all items on the shipping list with those physically received.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED WHAT’S IN THE BOX (2/2) > What’s in the Box > Software Installation SYSTEM OVERVIEW Item Description SYSTEM SETUP LIVE OPERATIONS LoRa Gateway ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING Includes the following: ∙ ∙ ∙ ∙ ∙ External power supply adapter 2.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (1/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW Applicable Version SYSTEM SETUP This manual describes operations for version 6.0 of the OmniSenseTM software. LIVE OPERATIONS Recommended System Requirements ANALYSIS OPERATIONS To check PC specifications: ANALYSIS IMPACT PROCESSING 1. Select Start > Computer ANALYSIS REPORTS 2. Right-click Computer LOG DATA 3.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (2/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW Installed Components SYSTEM SETUP The following components will be installed. LIVE OPERATIONS System Component ANALYSIS OPERATIONS Program framework required to operate the MicrosoftTM* .NET3.5/SP1 & 4.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (3/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW SYSTEM SETUP Installation Procedure 1. Browse the installation files at their location – either on CD, removable storage or on the PC itself. 2. Double-click the Setup.exe file to start the installation. Do not click any other file, as setup.exe initiates MicrosoftTM*.NET, ZephyrTM USB driver and OmniSenseTM software installation. 3. A MicrosoftTM*.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (4/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW 7. You may be asked to reboot your PC before proceeding. 8. Select Yes. Reboot your PC and the install process will continue automatically. The OmniSenseTM installer dialog will display automatically. 9. Select Next to continue. An end-user license agreement will display. Check the ‘I accept...’ box and select Next to continue.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (5/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS 11. Click Next to continue, unless a location other than the default is preferred. Record where this alternate location is for future reference. A dialog will indicate the installer is ready to start. Click Install to continue.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (6/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING 14. A firmware upgrade may be required for BioModules and MotorolaTM* XTSTM* Speaker Microphones. An additional directory [BioModule Firmware Upgrade] supplied on the CD or download contains all the files needed for the user to perform the upgrade themselves.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (7/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW Troubleshooting SYSTEM SETUP After install, some users may see overlapping of screen components: LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAMETERS 1.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (8/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW 3. In the Advanced Sizing... dialog, select Set a custom sizing level 4. In the Scaling Level dialog, set Scale to this percentage of normal size to 100% 5. Note that the above scaling factor is not the same as that set in the initial Display Settings dialog.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (9/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS License Key For OmniSenseTM 4.x, 5.x, and 6.x a license key must be purchased with the software. A license key dialog will appear the first time you run OmniSenseTM Live or Analysis.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (10/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS MotorolaTM* Barcode Scanner Support Support is included for optional MotorolaTM*Barcode scanners for rapid deployment of teams, subjects and components. Driver files for these scanners must be installed independently.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (11/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW 3. Select Next to continue. 4. Leave Complete checked. Select Next to continue. 5. Select Install to continue.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (12/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW 6. The installation will proceed automatically. 7. Select Finish to complete the install.
CONTENTS ABOUT THIS MANUAL GETTING STARTED GETTING STARTED Software Installation (13/13) > What’s in the Box > Software Installation SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE Hardware Installation A PSM Training system is supplied with a charging and configuration cradle capable of holding one, five or fifty BioModules.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW The PSM System (1/2) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal The PSM System > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAMETERS APPENDICES EULA SUPPORT INDEX ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ The PSM System transmits live physiological data from up to 240 subjects via
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW The PSM System (2/2) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAMETERS APPENDICES ZephyrTM PSM Training features: ∙ EULA ∙ ∙ ∙ ∙ ∙ SUPPORT INDEX ∙ ∙ ∙ ∙ ∙ Remote relay of multiple physiological & biomechani
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW OmniSenseTM Web Portal (1/2) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal OmniSenseTM Web Portal > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAMETERS APPENDICES EULA SUPPORT INDEX OmniSenseTM 6 now includes access to a web portal, and secure storage of data
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW OmniSenseTM Web Portal (2/2) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal > Hardware Components SYSTEM SETUP OmniSenseTM Cloud Account Definitions Term Description Account Client name for each customer. Subscription Fee Each account will have an affiliated monthly fee for each System, Administrator and Subject. Subjects Number of users of the system that are being monitored.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW Hardware Components (1/5) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal BioModule and ZephyrTM Strap > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE ∙ BASELINE FITNESS TESTING FITNESS PARAMETERS EULA SUPPORT INDEX ∙ Bluetooth * + Bluetooth * Low ∙ Energy transmitter module USB for PC configuration ∙ TM OMNISENS
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW Hardware Components (2/5) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal Garment Options > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAMETERS APPENDICES EULA SUPPORT INDEX ZephyrTM Strap ∙ ∙ ∙ Left side BioModule location Integrated ECG & capacitive breathin
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW Hardware Components (3/5) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal LoRa Gateway > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSE TOOLS TM BASELINE FITNESS TESTING FITNESS PARAMETERS APPENDICES EULA SUPPORT INDEX LoRa Gateway LoRa Gateway ∙ External power supply adapter for power ∙ 10 mile range (lin
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW Hardware Components (4/5) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal Charge Cradle > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING ∙ ∙ ∙ 5 BioModule capacity USB mini connectivity to PC BioModule configuration FITNESS PARAMETERS External Sensors APPENDICES GPS ∙ ∙
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM OVERVIEW Hardware Components (5/5) SYSTEM OVERVIEW > The PSM System > OmniSenseTM Web Portal Barcode Scanner > Hardware Components SYSTEM SETUP LIVE OPERATIONS ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSE TOOLS TM BASELINE FITNESS TESTING FITNESS PARAMETERS APPENDICES ∙ ∙ ∙ Assign BioModules & GPS to subjects Assign subjects to teams Start Live operations ∙ ∙ ∙ Integra
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Checklist SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options Setup Checklist Prior to Live operations, the following tasks should be completed using the OmniSenseTM Live Setup screens, and Live Preferences.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP BioModule Configuration (1/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview Default BioModule Configuration The default settings for newly shipped BioModules are: Setting Value Bluetooth * Enabled LoRa Enabled TM Bluetooth * Low Energy (BLE) Enabled Log Format Enhanced Summary TM
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP BioModule Configuration (2/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices LoRa Transmission Power Level Transmission power level is preset according to the destination region for the device. These settings are required to comply with local regulations.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Charge Devices SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration Charge Devices LoRa gateways are powered by an external power supply adapter.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Radio Network Options SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration Radio Network Options LoRa > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview > Subjects > Safety Alarm Limits > Devices Range: 10 miles. 1 to 240 subjects, 15 second data update rate.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Set Radio Network Type (1/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices Set Radio Network Type 1. Start OmniSenseTM Live using the desktop shortcut created when the software was installed. 2. Open the Preferences dialog using the Preferences button on the Live Toolbar. 3. Set the Radio Network Type using the pull down.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Set Radio Network Type (2/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist Set LoRa Mode > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview If Radio Network Type is set to LoRa, set the LoRa Mode. > Subjects > Safety Alarm Limits > Devices 1. In the Preferences dialog, select the LoRa Mode option using the pulldown menu.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP OmniSenseTM General Preferences (1/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist General Preferences > BioModule Configuration Preferences other than General Settings are described in other sections. > Charge Devices Click on the Preferences button in the Live toolbar. > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview The Preferences dialog will display.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP OmniSenseTM General Preferences (2/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist LoRa Setting Local PC IP The IP address of the computer running the OmniSense PC software. The PC may be connected to network though both wired and wire-less connection and hence will have multiple IP addresses to choose from the list. PC Port The port on which the UDP (User Datagram Protocol) communication happens with the LoRa Gateway.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP OmniSenseTM Live Setup Overview (1/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices Database Setup Overview Database setup is performed in the setup screens, accessed by the setup button in the OmniSenseTM Live toolbar. > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview Navigate through the screens using the tabs below each screen.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP OmniSenseTM Live Setup Overview (2/2) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist Teams > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview > Subjects > Safety Alarm Limits > Devices > Set Garment Type ∙ ∙ Assign BioModules & GPS devices to subjects, either in setup screen or using barcode rapid deployment tool (BRAT).
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Subjects (1/3) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration Add New Subject In the Subject tab of the Setup screens, click the New subject button.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Subjects (2/3) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences Subject Parameters When a new subject is created, some fields are populated by default values. These can be left as is, deleted, or edited.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Subjects (3/3) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options Subject Parameters (continued) Parameter Description HR Resting Determined by an orthostatic hypotension (Readiness) test HR Standing Determined by an orthostatic hypotension (Readiness) test > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview > Subjects HRV Rest SDNN > Saf
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Safety Alarm Limits SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration Safety Alarm limits are also called ROG Subject Status Thresholds. They are indicated by the color (red, orange, or green) of the subject name panel in each OmniSenseTM Live BioGauge.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (1/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration Add/Edit BioModules by USB connection 1. Connect BioModule to PC in charge cradle. 2. Select the Setup button on the OmniSenseTM Live toolbar. 3. Select the Hardware tab. 4. Select the Add/Edit button. 5. Select Add or Edit in the Hardware Setup Wizard when it displays and then select Next. 6. Select ZephyrTM, then Next. 7.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (2/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist 8. > BioModule Configuration > Charge Devices > Radio Network Options OmniSenseTM will normally auto-detect the BioModule in a few seconds, and populate the pull-down item with the device serial# (BHTxxxxx). Use the Detect button to retry manually if necessary. If more than one BioModule is connected, select the appropriate device from the pulldown list of identifiers.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (3/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type Add BioModules from an XML File This method may be used to add multiple new BioModules to an existing system. This saves the effort of adding multiple devices manually. 1. In the 3rd dialog of the Hardware Setup Wizard, select Config File, and Next. 2.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (4/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type Add BioModules from a Database .FDB File A completely new system may be supplied with a database file which contains all information on devices included with the system. OmniSenseTM software should be installed first, and then the installed database file replaced by the pre-configured file.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (5/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type Add GPS Devices GPS devices are added by BluetoothTM* connection to the PC. QStarz 818XT are the only GPS devices supported at this time. BluetoothTM* must be enabled in the host PC. If enabled, then the BluetoothTM* symbol will show in the PC System Tray.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (6/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist 4. > BioModule Configuration > Charge Devices Wait while the GPS is detected. The Wizard will populate with GPS details. Use the manual Detect button to try again if necessary. Power cycle the GPS between attempts. A blue LED on the GPS will indicate that BluetoothTM* is active.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (7/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist Assign Devices to Subject > Charge Devices When BioModules and GPS units have been added to the system, they are available for assignment to subjects. > Radio Network Options Warning > Set Radio Network Type Once devices have been assigned in the software, ensure that the correct subject is given the devices. If not, then the data in the system may be assigned to the wrong subject.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (8/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices De-assign Devices from Subject 1. In the Hardware tab, select the subject. 2. Click the De-assign button. 3. A Confirm dialog will display. Select Yes or No as required.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Devices (9/9) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview Manually Pair a GPS A BioModule can be manually configured to communicate with a GPS. The GPS MAC address is required.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Set Garment Type SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type Set Garment Type Garment type must be set in OmniSenseTM Live so that the orientation of the BioModule on the subject is known and posture can be properly interpreted. 1. Select the Setup button on the OmniSenseTM Live toolbar 2. Select the Hardware tab 3.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Teams (1/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSense General Preferences TM > OmniSenseTM Live Setup Overview > Subjects > Safety Alarm Limits > Devices Add /Edit/Remove Team Subjects may exist autonomously in the OmniSenseTM database. In OmniSenseTM Analysis, subjects are listed on a node labeled ‘No Team Assigned’.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Teams (2/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration Populate Teams Add Subject > Charge Devices > Radio Network Options 1. In the Team tab, select both the subject in the left panel, and the team in the right. They will highlight blue when selected. 2. Click the arrow button pointing to the Team panel. 3. The subject will be added to the selected team node.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Teams (3/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration Deploy Team The final stage in preparing for a Live session is to deploy a team or teams. > Charge Devices > Radio Network Options 1. Select the Setup button on the OmniSenseTM Live toolbar 2. Select the Deployment tab 3. Select the team(s) to be deployed from the Teams pane, and a vacant tab from the Tab A/B/C/D array.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Teams (4/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist 6. Tiles displayed to the right of the setup tab will appear black until radio communication with the deployed BioModules has been established. To establish communication, click the Live button. Once connected, tiles will display subjects’ red/orange/green status. 7. Once radio communication and subject status have been established, the subject tiles will be active. 8.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Barcode Scanner Operations (1/3) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview Print Pick Lists Using a supported MotorolaTM* Barcode scanner, devices can be rapidly assigned to subjects in the field by scanning barcode labels on the devices, or from printed pick lists which can be generate
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Barcode Scanner Operations (2/3) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices Scanning Operations 1. Connect the barcode scanner to the host PC. 2. Start OmniSenseTM Live and select the Setup > Subject screen. 3. Scan the Start BRAT code on any of the printed pick lists. 4. The BRAT dialog will launch.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP Barcode Scanner Operations (3/3) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist 5. Scan the team, subject and device code in succession.. 6. Approved DoD ID cards are supported.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP BioModule Operation (1/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options Power On/Off Power On 1. Press the center of the BioModule to power on; this will operate a microswitch inside the device. > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview > Subjects > Safety Alarm Limits > Devices > Set Garment Type > Teams 2.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP BioModule Operation (2/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration BioModule LED Indications BioModule on Garment > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview Constant Flashing Unlit Cannot connect to configured GPS Transmitting Blue Transmit not enabled Orange More than 30% battery Transmitting, less than 30% battery
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP BioModule Operation (3/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices ZephyrTM Strap Fitting 1. Fasten at front and adjust tension for a snug fit. 2. Rotate strap so device is under left arm. 3. For optimum breathing detection, device should be located at the apex of rib curvature. 4. Tension indicator loop at rear should be flush when subject inhales fully. It is shown un-tensioned here. 5.
CONTENTS ABOUT THIS MANUAL GETTING STARTED SYSTEM SETUP BioModule Operation (4/4) SYSTEM OVERVIEW SYSTEM SETUP > Setup Checklist > BioModule Configuration > Charge Devices > Radio Network Options > Set Radio Network Type > OmniSenseTM General Preferences > OmniSenseTM Live Setup Overview BioModule Removal The ZephyrTM strap receptacle is designed for a very firm fit - this prevents the BioModule from becoming dislodged accidentally.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Startup Sequence (1/2) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview System Startup 1. Power on all BioModules. 2. Power on all GPS units, if used. 3. Connect gateway to PC via WiFi router. 4. Start OmniSenseTM Live.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Startup Sequence (2/2) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview OmniSenseTM Live Startup Sequence Immediately on startup, BioGauges will display for each subject, with subject status indicated by the background color of their subject name pane.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Live Screen Overview (1/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Live Screen Components > Startup Sequence 1 > Live Screen Overview 5 > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area > Preferences 2 > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING 3 ANALYSIS REPORTS 4 LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS # Comp
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Live Screen Overview (2/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Side Tabs > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA Accel Comms Map OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TEST
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Live Screen Overview (3/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Live Toolbar > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAM
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Live Screen Overview (4/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge Recording Logic ∙ ∙ Data must be recorded in Live for later display in OmniSenseTM Analysis.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Live Screen Overview (5/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence Multiple Recordings ∙ > Live Screen Overview > BioGauge Each time the Record button is pressed in a continuous session in the Live Module, a new individual subject session is created in the database for each subject deployed.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS BioGauge (1/4) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Standard BioGauge > Startup Sequence 6 > Live Screen Overview 8 > BioGauge 7 > Side Tabs > Map Window 5 > Session Names & Markers > Notification Area > Preferences 14 > Connection to Cloud Portal > Demo Mode 4 9 ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING 3 12 13 10 ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL 2 OMNISENSETM MOBILE 1 11 OMNISENS
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS BioGauge (2/4) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Training BioGauge > Startup Sequence > Live Screen Overview > BioGauge 1 > Side Tabs > Map Window > Session Names & Markers > Notification Area 2 > Preferences 5 4 > Connection to Cloud Portal > Demo Mode 3 ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE # Description OMNISENSE TOOLS 1 Subject
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS BioGauge (3/4) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge Configure BioGauge Configure Standard BioGauge ∙ To configure the BioGauge, display OmniSenseTM Live Preferences using the toolbar button. ∙ In the Preferences dialog, select the Gauge Settings button.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS BioGauge (4/4) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence BioGauge Parameters A variety of parameters are available for configurable fields in BioGauges.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (1/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Details Tab > Startup Sequence > Live Screen Overview 1 > BioGauge > Side Tabs 2 > Map Window 3 > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal 4 > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING 5 ANALYSIS REPORTS LOG DATA 6 OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS 7 BASELINE FITNESS TEST
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (2/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Acceleration Tab 1 > Startup Sequence 2 > Live Screen Overview > BioGauge 3 > Side Tabs > Map Window > Session Names & Markers 4 > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS 5 ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE 6 OMNISENSETM TOOLS BASELINE FITNESS TESTI
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (3/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Communications Tab > Startup Sequence > Live Screen Overview 1 > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area 2 > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS P
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (4/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence Communications Error Indications No Error No Response from Device ∙ BioModule powered off BioModule out of battery Out of range Signal blockage or interference Wrong device on subject Hardware fault Duplicated LoRa Network Address Device Not Worn ∙ ∙ ∙ ∙ ∙ ∙ ∙ Gateway Error ∙ ∙ ∙ ∙ ∙ ∙ Gateway not connected USB connector fault (replace) > Live
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (5/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS GPS Tab > Startup Sequence 1 > Live Screen Overview 2 > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING 3 ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARAMETE
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (6/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Workout Tab > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs 1 > Map Window > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING 2 ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL 3 OMNISENSETM MOBILE OMNISENSETM TOOLS BASELINE FITNESS TESTING FITNESS PARA
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (7/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs Managing Workouts A Workout is a prescribed activity session in OmniSenseTM Live with color HR indications based on Training Zones. Training Zones are levels of exertion defined by heart rate thresholds. They are configured in Live Preferences. > Map Window > Session Names & Markers 1.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (8/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS %HR Max Lower Threshold %HR Max Upper Threshold %HR Max High Intensity 90 100 Anaerobic 80 89 > Session Names & Markers Zone Gap 75 79 > Notification Area Aerobic 60 74 > Preferences Rest/Recovery Less than 84 59 > Startup Sequence Zone > Live Screen Overview > BioGauge > Side Tabs > Map Window > Connection to Cloud Portal Lower Zone thresholds are
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (9/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS 6. Select the Training tab at the bottom of the OmniSenseTM Live screen. This displays subject Training BioGauges. 7. The aim of the workout is to engage in activity, which matches the background color of the subject Training BioGauge to the background color of the Current Zone in the Workout tab. 8.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (10/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs Workout Files OmniSenseTM workouts are based on the Paul Robbins Periodization System. Workout files are stored at C:\...\Documents\OmniSense\WorkoutFiles in the form of csv (comma separated values) files which will open automatically in MicrosoftTM* ExcelTM*.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (11/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area Send Team Workouts from Web Portal A coach can send a Team Workout from the web portal, as a single workout, or as part of a training plan.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (12/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview Safety Tab The safety tab displays tiles showing the subject name and time-in-currentROG status only, plus the ROG status itself as a background color.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (13/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence Medic Tab In Live Preferences > General Settings are Medic tab settings. > Live Screen Overview > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS The default settings are The Medic tab is displayed.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Side Tabs (14/14) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Training Tab > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING ANALYSIS REPORTS LOG DATA OMNISENSETM WEB PORTAL OMNISENSETM MOBILE OMNISENSE TOOLS TM BASELINE FITNESS TESTING ∙ ∙ ∙ ∙ FITNESS PA
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Map Window (1/2) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs Map Window ∙ ∙ ∙ An internet connection is required. Subjects must be assigned GPS devices. A separate map window is enabled by a toolbar button.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Map Window (2/2) SYSTEM OVERVIEW SYSTEM SETUP Snail Trail Parameter Description Marker Opacity Slide button to set marker opacity Full Path Width Slide button to set width of path preceding snail trail. Extreme left = full path hidden. > Side Tabs Full Path Opacity Slide button to set full path opacity > Map Window Save Settings Save a preferred setting for repeated use. Default Settings Return to default settings.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Session Names & Markers (1/3) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge Session Names Sessions can be named in OmniSenseTM Live using the toolbar Session Name field pull-down, and adjacent Change Session Name button to activate the selection.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Session Names & Markers (2/3) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview Session Markers Named markers can be added to sessions using the toolbar Marker field and adjacent Add Marker button.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Session Names & Markers (3/3) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS 3. The order of the markers in the dialog is significant. Each time the Add Marker button is clicked to add a marker to a session, the list automatically increments to the next marker on the list. 4. In order to re-use the same marker on the list, you must re-select it from the pull down menu before adding it. 5.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Notification Area SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview Notification Area The notification area is displayed using the Show/Hide Bottom Panel button on the Live toolbar.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Preferences (1/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS Preferences > Live Screen Overview The settings described in the following section do not include those listed in the table below. > BioGauge The table shows the section of this manual where they are described.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Preferences (2/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS > Startup Sequence > Live Screen Overview > BioGauge > Side Tabs > Map Window > Session Names & Markers > Notification Area > Preferences > Connection to Cloud Portal > Demo Mode ANALYSIS OPERATIONS ANALYSIS IMPACT PROCESSING Intensity & Load Intensity is an instantaneous measure of effort.
CONTENTS ABOUT THIS MANUAL GETTING STARTED OMNISENSETM LIVE OPERATIONS Preferences (3/5) SYSTEM OVERVIEW SYSTEM SETUP LIVE OPERATIONS The graph below shows the default Low and High Physiological Intensity limits and how the ten intensity level zones are distributed between these limits.
