Getting Started Guide

282
OMNISENSE
TM
MOBILE
Overview (7/9)
HxM Firmware Upgrade
When the mobile application is used in conjunction with a Zephyr
TM
HxM Smart,
it will check the device rmware version when it rst connects.
If an update is available, you will be asked if you wish to upgrade. The process
takes a few minutes. You will be notied if the HxM battery should be replaced
before updating.
Automatic rmware check. Available update notication. Wear the sensor to keep it
powered on.
Low battery notication.
Change battery and restart
the process.
Update in progress. Update complete.
Note
Automatic rmware updates are available for the HxM Smart only, not the
Zephyr
TM
BioModule.
Caution
If a low battery notication is shown, replace the battery before updating the
rmware. A battery failure during rmware update may break the device.
CONTENTS
ABOUT THIS MANUAL
GETTING STARTED
SYSTEM OVERVIEW
SYSTEM SETUP
LIVE OPERATIONS
ANALYSIS OPERATIONS
ANALYSIS IMPACT
PROCESSING
ANALYSIS REPORTS
LOG DATA
OMNISENSE
TM
WEB PORTAL
OMNISENSE
TM
MOBILE
>Overview
> Application Screens
OMNISENSE
TM
TOOLS
BASELINE FITNESS TESTING
FITNESS PARAMETERS
APPENDICES
EULA
SUPPORT
INDEX