Getting Started Guide

281
OMNISENSE
TM
MOBILE
Overview (6/9)
Link Device
For both Android
TM
*
and iOS
TM
*
version of the application, devices are linked
from within the application itself. No Bluetooth
TM
*
pairing process is necessary.
1. Power on your device. If an HxM Smart is not worn, it will power o
automatically after ~ 30 seconds.
2. Access the Sensor screen from Menu > Settings > Sensor
3. The phone will automatically start scanning for and detect Zephyr
TM
devices. You can re-scan by tapping the circular arrow icon at top right.
4. Select a device by tapping it. A notication will display ‘Updating sensor
information in portal’.
When the sensor has been successfully linked and the portal updated, a
second message ‘ Sensor information updated in portal successfully’.
will display.
5. If your sensor is not detected initially, power cycle it and repeat the
process.
Once a sensor is linked, the process need not be repeated unless a
dierent sensor is used.
CONTENTS
ABOUT THIS MANUAL
GETTING STARTED
SYSTEM OVERVIEW
SYSTEM SETUP
LIVE OPERATIONS
ANALYSIS OPERATIONS
ANALYSIS IMPACT
PROCESSING
ANALYSIS REPORTS
LOG DATA
OMNISENSE
TM
WEB PORTAL
OMNISENSE
TM
MOBILE
>Overview
> Applications Screens
OMNISENSE
TM
TOOLS
BASELINE FITNESS TESTING
FITNESS PARAMETERS
APPENDICES
EULA
SUPPORT
INDEX