Getting Started Guide

299
OMNISENSE
TM
TOOLS
Zephyr
TM
Cong Tool (1/9)
Operation
1. Connect the BioModule(s) to a PC in a single or multi device cradle.
2. Double-click the Zephyr
TM
Cong Tool.exe le to open. An initial Name
Entry Form will display.
3. Enter your name, or retrieve it using the lower pull-down list. It is
remembered once used. This is NOT a security check. The tool maintains
a record of who has used it, and which BioModules have been congured.
This is kept in a .csv le located at
C:\ProgramData\Zephyr\ZephyrDeviceUpdateLog.csv
This allows a basic audit of all device changes to be maintained.
4. Enter/select a name, click Update Devices and the tool will open.
If multiple devices are detected, they will display, but none are selected in
the capture above, so no data shows in the tool.
CONTENTS
ABOUT THIS MANUAL
GETTING STARTED
SYSTEM OVERVIEW
SYSTEM SETUP
LIVE OPERATIONS
ANALYSIS OPERATIONS
ANALYSIS IMPACT
PROCESSING
ANALYSIS REPORTS
LOG DATA
OMNISENSE
TM
WEB PORTAL
OMNISENSE
TM
MOBILE
OMNISENSE
TM
TOOLS
>Overview
> Zephyr
TM
Cong Tool
> ZUSBUpdate Tool
> Zephyr
TM
Kubios Converter
> Zephyr
TM
Data Plotter
BASELINE FITNESS TESTING
FITNESS PARAMETERS
APPENDICES
EULA
SUPPORT
INDEX