Congratulations on your purchase of the Zephyr® Ion Vaporizer. Zephyr Vaporizers are widely considered to be the best aromatherapy vaporizers available on the market. The Zephyr Ion is product of years of research and development. We believe that aromatherapy enthusiasts deserve an affordable vaporizer that does not skimp on features. Our goal has been to design an aromatherapy vaporizer that is affordable to everyone, while offering more user friendly features than higher priced models.
This Box Includes 1 Zephyr Ion aromatherapy vaporizer 2 Mouthpieces (bags pre-attached) 2 Baskets 1 Liquid pad set 2 Replacement air filters 2 Replacement basket seal washers 4 Replacement bags with bag ties 4 Replacement screens 1 USB cord Specifications Voltage Input: 110 - 120V 50/60Hz Temperature range: 100ºF - 440ºF Features Fully enclosed ceramic heating element for superior flavor Vapor bag collection system Easy-to-use Ion push button valve (patent pend
WARNING Carefully read all safety information presented in this section before operating the device. Please retain these safety guidelines for future reference. The Zephyr Ion is not licensed as a medical device. It is therefore not designed, intended, or recommended for use as a medical device. Keep the Zephyr Ion, accessories, plastic bags, and all other packing material away from children as they present potential choking and/or asphyxiation risks.
Aromatherapy Overview The Zephyr Ion aromatherapy vaporizer releases active ingredients from aromatic plant compounds through a technique know as vaporization. During this process hot air is passed over aromatic plant material (listed on the following page). The hot air volatilizes the active compounds in the plant material, releasing their aromas, which are subsequently inhaled, into the air.
List of Aromatic Plants The plants listed below are suitable for aromatherapy vaporization. Before using any other aromatic plant compounds with this device please consult a reputable source, such as a licensed aromatherapist or herbalist. Do not use aromatic plants or aromatic plant compounds that are not recommended by a licensed aromatherapist or herbalist.
Factors That Influence Aromatherapy Vaporization Vaporization of aromatic plant compounds may be influenced by a number of factors, including: Quantity – the amount of aromatic plant material put into the device. Quality – the concentration of aromatic compounds in plant material. Temperature – the degree of heat applied. Suitable aromatic plants have varying recommended temperatures, which are listed on the previous page.
DISCLAIMER All products manufactured by Zephyr Vaporizers are designed, marketed and sold for lawful, aromatherapy-related applications only. Products manufactured by Zephyr Vaporizers are not designed, marketed or sold for use with any illegal substances or compounds. The use of phrases, such as "herb(s)," "herbal", "herbal blend(s)", and "plant material(s)", on our website, marketing materials, and product literature refers to lawful, aromatic plants, such as eucalyptus, sage, and lavender.
Operating Instructions Please read all instructions and suggestions to get the best experience from your Zephyr Ion aromatherapy vaporizer
1. Inspect the Zephyr Ion Vaporizer and plug in the device When the device is plugged in, the ‘Power’ LED and the LCD screen will glow red. This is to show that the device has power, although the device will not be on. WARNING: Before plugging in the device, inspect it for any obvious damage that might have occurred during shipping. If the protective housing or power cord show any cracks or damage, do not plug in the device. The Ion is designed to be used on a heat-resistant solid surface.
2. Set the temperature, and pre-heat the device Turn the device on by pressing the ‘Power’ button once. The power LED will change to green to show that the heating element is on. The LCD screen will remain red and the desired temperature will flash as the device is heating up. Once the device has reached the desired temperature the LCD screen will turn green. The default temperature is 100°F. To set your desired temperature use the ‘+’ or ‘-’ buttons.
3. Prepare the plant material and fill the basket To prepare your aromatic plant material, you should first grind the material and then place it loosely in the basket. You can fill the basket as little or as much as you like (see Factors That Influence Aromatherapy Vaporization earlier in this manual). Typically, we recommend filling the basket between 1/3 and 1/2 full.
4. Place the basket into device Once the desired temperature has been reached and the Ion’s LCD screen has turned green, open the lid of the Ion and place the basket in the basket holder. Make sure that it is sitting flat before attempting to close the lid. The lid will close easily when the basket is seated correctly. Forcing the lid against an improperly positioned basket could damage the device. If you drop aromatic plant material into the basket holder, it may prevent the basket from seating properly.
5. Familiarize yourself with the valve The Zephyr Ion uses a bag to collect vapor before inhaling. The bag method is widely preferred as the best method for collecting vapor. Collecting the vapor in a bag allows the vapor to cool before inhaling which minimizes irritation of the respiratory tract. The bag also allows the utilization of vapor without being wedded to the vaporizer itself. The Zephyr Ion Valve (patent-pending) is an easy to use push button design.
6. Fill a Bag with Vapor Press the ‘Air’ button to start the air flow and wait about 5 seconds before sliding the valve/bag attachment onto the air straw (it takes about 5 seconds for the aromatic plant material to heat up and aromatic compounds begin to volatilize). When the bag begins to reach capacity, turn the air flow off by pressing the 'Air' button again. Then remove the valve/bag attachment and also remove the basket from the basket holder.
7. Inhale the vapor To inhale vapor, press the valve button and hold the mouthpiece of the valve against your lips. Inhale. Vapor is most effective right after it has been volatized. The effectiveness will decrease the longer it is left in the bag. Note: Once a bag is filled with vapor, we recommend using it within 10 minutes. Instead of using all of the vapor at once, many people enjoy the ability to inhale slowly over time using our bag/valve system.
8. Fill more bags from the same basket of material Depending on the quality of the aromatic plant material the concentration of aromatic compounds in it (see Factors That Influence Aromatherapy Vaporization earlier in this manual), you may be able to fill multiple bags from one basket of aromatic plant material material. We have included multiple valves so that bags may be filled in succession. Vapor density will diminish as the active compounds in your aromatic plant material are completely volatilized.
9. Shutdown / Automatic Shutdown When you are done using the Ion, turn the device off by pushing the power button. For safety reasons, we recommend unplugging the device when it is not in use. The Zephyr Ion has an automatic shutoff safety feature. The default shutoff time is 1 hour (60 minutes). The shutoff timer will re-start from the last time you press any of the buttons on the Ion. You can adjust this automatic shutoff time by pressing the air button and the ‘+’ button at the same time.
Extra Bags We have provided you with 4 extra replacement bags. We recommend replacing the bags every 1-2 months (depending on frequency of usage). To replace the bag material, first remove the old bag by snipping the bag tie that holds it to your valve. Place the valve inside the open end of the new bag. Distribute the bag material evenly around the grooved section of the valve. Allow the bag material to extend farther than necessary to ensure a good seal.
Cleaning For smooth operation, we recommend keeping your vaporizer well-maintained. After each use, once the device has been unplugged and cooled, remove any spilled aromatic plant material either by brushing or blowing it off. Regularly check the screen at the top of the basket holder, the screen at the bottom of the basket, and the screen at the base of the straw to ensure that they are not obstructed with plant material. Also, check the air filter on the bottom of the device.
Liquid Pad The Zephyr Ion liquid pad facilitates vaporization of the essential oils from the aromatic plants listed in this manual. The pad is constructed out of tightly bunched stainless steel wire, which act as a vehicle for essential oils: the stainless steel wire acts as a framework for essential oils just as plant fibers provide a framework for aromatic compounds in ground up plant material.
the operating instructions to vaporize the aromatic compounds in the essential oils. Suitable essential oils without solvents can be vaporized immediately after they are applied to the liquid pad.
Zephyr® Ion Warranty Please Note: Opening the Zephyr Ion Vaporizer’s housing will void the warranty. Please contact Zephyr Vaporizers for all service or repair needs. Warranty Zephyr Vaporizers ("Zephyr") warrants solely to the original purchaser that the Zephyr Ion ("Ion") will be free from defects in material, operation and workmanship under normal use for a period of two (2) years from the date of purchase.
In the event that the warranty period has expired or there is an issue with the product that is not covered by this warranty, the product may be returned to Zephyr or an authorized service center for repair. Zephyr will provide the customer with an estimate for repair. Once payment for the estimate has been received by Zephyr, the product will be repaired and returned to the customer. Zephyr is not responsible for any lost or damaged shipments.
Zephyr® Ion Vaporizer Troubleshooting Guide
First steps 1. 2. 3. Check first that your Ion is plugged in and turned on. There will be a red screen and red light when your Ion is plugged in and off. If your Ion is plugged in and the lights are not on, make sure the outlet is working by testing with another appliance e.g. cell phone charger. Ion will not heat up • • Set your Ion to lowest temperature, which is 100°F, then switch from Fahrenheit to Celsius then switch back to Fahrenheit.
Leaks • • From inside Ion / under the Lid • Confirm that the Basket Cover Washer is properly positioned and in place (see above). From Valve • Confirm that Vale is firmly seated on nozzle by pushing down firmly with the button fully depressed while twisting slightly around the straw. • Confirm that the bag is not obstructing airflow into the valve.
For all updates, technical support, video tutorials, sales, and accessories visit us at ZephyrVaporizers.
