Owner`s manual

2. Set the temperature, and pre-heat the unit
Turn the unit on by pressing the ‘Power’ button once. The power LED will
change to green to show that the heating element is on. The LCD screen will
remain red and the desired temperature will flash as the unit is heating up. Once
the unit has reached the desired temperature the LCD screen will turn green.
The default temperature is 360°F. To set your desired temperature use the ‘+’ or
‘-’ buttons. We recommend using a temperature between 360°F and 380°F for
most biomass.
WARNING:
When the heating element is on, all heated components will become very hot.
Never touch the hot surfaces.
Keep away from children.