Owner`s manual
9
Adjust the battery position and
attach the batteries:
• Attach the battery onto the battery
mount. Be sure the safety catch is
engaged.
Dock the sled in the docking
bracket:
• Hold the sled upright, with the
monitor (front) to the left. Place the
center post into the bracket so the
bottom of the stage rests on the
yoke.
• Push the aircraft pin back through
the yoke, securing the post in the
bracket.
dovetail
lock
fore-aft
adjustment
knob
side to side
adjustment
knob
Remove the dovetail from the
stage and set aside:
• Loosen the dovetail locking knob
until the dovetail can be tilted out
sideways.
• Safety stops on the dovetail keep
the dovetail from sliding off the
stage when the dovetail locking
knob is loose.
• The stops also prevent the dovetail
from being inserted into the front
or rear of the stage. Therefore, do
not attempt to slide the dovetail into
place from the front or back.
Back of stage:
• Camera power connector. 3 pin
LEMO: EGG.0B.303.
• Standard denition (PAL/NTSC)
composite video in. BNC
V-lock battery
AB battery
Front of stage:
• HD BNC
• Two expansion ports for future
options and accessories.
• Additional power connector.
3-pin LEMO: EGG.0B.303.