Hood User Manual

ManualsBrandsZephyr ManualsCooking AppliancesVista Wall Mount Range Hood with Invisible Touch Controls, Tri-Level Lighting, Aluminum Mesh Filters, Multiple Blower Options, CleanAir Function, Perimeter Aspiration, and Auto Delay-Off: 30" Width

The following instructions are for preparing

the hood for use with an external or in-line

blowers models CBE-1000 or PBN-1000A.

CAUTION: To reduce the risk of ﬁre and electric

shock, install this rangehood only with remote

blowers rated maximum 6.2 A.

For internal blower instructions please turn to

page 13.

1. Remove the (6) screws securing the blower pla-

te to the blower housing and remove blower

plate. See.Fig.1

2. Detach rectangular metal plate from blower pla-

te. See Fig. 2A Flip blower plate 90 degrees and

attach rectangular plate to blower plate side

with round knock-out.See Fig.2B

3. Re-install blower plate into blower housing by

following reverse instructions from step 1 then

use the screws provided to complete installa-

tion. (Tot.14)

4. Remove top knock-out plate and remote blower

knock-out plate by using a ﬂat head screwdriver.

See Fig. 3 and Fig. 4

5. Secure 8” round blower collar to top of blower

Installation - External & In-Line Blower

Preparation

- 15 -