Product Datasheet/Brochure

ZEPHYRONLINE.COM
DOWNDRAFT
OPTIONAL
ACCESSORIES
LIFT
DESIGNER
OPTIONAL ACCESSORY OPTIONAL ACCESSORYDESCRIPTION DESCRIPTION
Model DDA-0002 Model AK00070
Model AK00071
Models
DDS-0030, DDS-0036
Model 11030132
Model 54190053
Model 54190054
Model AK00080
Models
DDT-0030, DDT-0036
Model AK0072
Model ZRC-00LF
Model DDE-0001
Remote Up/Down Control 1-7/8” x 19” to 8” Round Transition
1-7/8” x 19” to 10” Round Transition
Gas Cooktop Seal Kit
Extension Cable – 5ft.
Front Panel Rough-In Plate – 8” Round
Front Panel Rough-In Plate – 10” Round
Rectangular Duct – 2-ft. Sections
(1-7/8” x 19”)
Range Trim Kit
Rectangular adapter for 1-7/8” x 19”
Non-Duct Recirculating Kit
End Cap Trim Extension +1” Width
Use when you cannot reach the UP/
DOWN button on the downdraft chimney.
Can be located on counter top, face of
cabinetry or on the side cabinet of an
island. Cut-out: 2-1/4”H x 2”W
Cannot be used where remote control will
interfere with cooking, where hot pans
could be set, or where hot liquids could
be spilled on the control.
(Remote wiring connects with 6-pin connection.)
Rectangular to 8” round transition for
side, rear, or bottom exhaust when using
DBI-600A Blower. Can be attached to
downdraft unit or rectangular duct
(AK00072).
Rectangular to 10” round transition for
side, rear, or bottom exhaust when using
external blower. Can be attached to
downdraft unit or rectangular duct
(AK00072).
Recommended for use with all gas
cooktops. Includes trim bracket and trim
seal.
30”, 36” widths
Use where electrical panel is remotely
mounted. Extends electrical panel cable
an additional 5 feet.
Two can be connected to achieve 10ft.
Use where 8” round duct or elbow
attaches to front of airbox (model
DBI-600A used as remote blower
installation).
Use where 10” round duct or elbow
attaches to front of airbox (exterior or
in-line blower installation).
Use to extend ducting when used in side,
rear, or bottom exhaust. Can be cut down
to size and multiple sections can be
connected to each other.
Galvanized steel construction.
Use with free-standing range - where a
gap is present between back of range
and downdraft
30”, 36” widths
Use to connect 1-7/8” x 19” rectangular
duct directly to downdraft when using
side or rear exhaust.
Use where ducting is not feasible or
available. Mount to toe kick or base of a
cabinet and attach directly to DBI-600A
Blower using 8” round duct. Kit can be
rotated so that the exhaust is not directly
at your feet. Includes recirculating lter
and decorative cover plate.
Use left and right to increase the overall
trim width by 1”.
HA0141
HD1102A
MODEL DDE-0001
End Cap Trim Extensions
(Increases trim width 1-inch to 31-, or 37-inches.)
MODELS DDS-0030, DDS-0036
Gas Cooktop Seal Kit
(Recommended for use with gas cooktops.)
MODEL DDA-0002
Remote Up/Down Control
MODEL 11030132
Extension Cable – 5ft.
MODELS DDT-0030, DDT-0036
Range Trim Kit
(Option to fill gap between range and downdraft.)