customer service 1.888.880.8368 Duct Cover Extension Z1C-00VS For use with Layers Wall and Vista Wall range hood ENGLISH..........................2 FRANÇAIS........................
Installation - Mounting the Duct Cover MOUNTING THE DUCT COVER 1. Install the electrical wiring and test hood for functions prior to installing the duct covers. 2. If using hood in air recirculating mode make sure to install the air diverter plate prior to mounting the duct covers. See the manual included with the recirculating kit for more instructions. 3. Adjust the width of the duct cover support bracket so that it fits inside the top of the chimney and observing the distance shown in Fig.1 4.
Installation – Fixation De Cheminees FIXATION DES CHEMINEES 1. Installez la connexion électrique et essayez le fonctionnement de la hotte avant d’installer les cheminées. 2. Si vous utilisez la hotte version recyclage, assurez-vous d’installer le déviateur d’air avant d’installer les cheminées. Pour de plus amples instructions, consultez le manuel fourni avec le kit de recyclage. 3.
DUCT COVER EXTENSION SPECIFICATION Layers Wall 9- 11-1/8” 18-1/8” Z1C-00VS min. ducted - 43-1/2” min. recirc. - 47-1/2” max. - 80” 14-1/16” STANDARD min. ducted - 27” min. recirc. - 31” max. - 44-1/2” 3-9/16” 27-9/16” 35-3/8”, 41-15/16” Vista Wall 11-1/4” 10-1/16 Z1C-00VS min. ducted - 42” min. recirc. - 46” max. - 78-1/2” 17-5/8” 13-9/16” 16-1/2” 3-1/2” (Ø 6'') Internal Blower 4-5/16” (Ø 8") Remote Blower STANDARD min. ducted - 25-1/2” min. recirc. - 29-1/2” max.
