Use and Care Manual

18
Trapeze Use, Care, and Installation Guide
TRAPEZE
ISLAND
DESIGNER
Features & Controls
1. Bl
ower On/O
By pr
essing the blower is switched on and o. When switched on, the blower starts up on speed level 1.
2. Speed Selection
- Pr
ess to decrease fan speed. 3, 2, 1.
- If fan is on Speed 1 and is pr
essed, the fan will power o.
- Pr
ess to increase fan speed. Fan On, 1, 2, 3.
- If hood is o and is pr
essed, the fan will turn on speed 1.
3
. Delay O
This featur
e is used for programmed shut down of blower 5 minutes after the function is activated. Press
once
, a dot flashes in the lower right side of display indicating the function is on. The blower will
completely shut do
wn after 5 minutes.
4
. Lights Low/Medium/High/O
Switch ligh
ts on to low by pressing once, press a second time for medium, press a third time for high,
and again to shut o the ligh
ts.
5
. Display Window
The display windo
w indicates speed levels and features such as bae filter clean reminder, delay o and
clean air indicator
.
Lights Low/Medium/High/O
5 Min Delay O
Display (speed level, delay o, filter clean)
Adjust 3 Speed Levels
Blower On/O
1
2
3
4
5
Touch Controls