Hood User Manual

11
Installation – Remote Blower Preparation
3. Install threaded cable lock and remote blower
wiring harness through the remote blower
ZLULQJNQRFNRXW$WWDFKE\0VFUHZV
5. Connect 6 pin male connector from remote
blower wiring to 6 pin female connector on
control board box.
REMOTE BLOWER PREPARATION
 5HPRYHLQWHUQDOEORZHUÀDQJHSODWH
 ,QVWDOOUHPRWHEORZHU´URXQGFROODU$WWDFKE\
0VFUHZV
NOTE: For instructions on mounting the remote
blower please refer to the CBE-1000 or PBN-
1000A remote blower manual included in the
remote blower packaging or on our website at
www.zephyronline.com
4. Secure ground wire from remote blower wiring
to ground wire rivet nut.