Corporation Range Hood Use, Care, and Installation Guide
18
Replacing Light Bulbs:
CAUTION: Light bulbs become extremely hot when turned on. DO NOT touch bulbs until switched o
and cooled. Touching hot bulbs may cause serious burns.
Make sure all power is turned o and bulbs are not hot.
Remove bulb by pressing both ends of the metal retaining clip together, the light socket will now protudefrom the hood
allowingyou to remove the bulb.(B e careful when releasing retain clip as it is under pressure to hold it in place)
Replacement halogen bulbs are available at most stores which sell light bulbs. Purchase type GU-10, 120 V, 50 W.
To replace mood lightingbulb,remove bae lter from hood. Lift up the metal plate which is inside the hood on the left
and right sides. It is held on with two philips head screws. Unscrew mood lightingbulb counter-clockwise and replace
with a standard 40W, 125V-1 30V mediumbase bulb.
Press together
to release clip
HalogenBulb
MoodLightingBulb
MetalPlate
Maintenance - Lights