Troubleshooting guide

ASSEMBLY INSTRUCTION

ASSEMBLY STAGE #5

Attach Pedals & Foot Rest to the Main Base Assembly

Assembly Hardware Required: (*Assembly hardware may be preinstalled)

#23 Spring Washer Qty. 6 #26 Pan Head Screw* Qty. 2

#24 Acorn Nut Qty. 6 #29 Button Head Allen Bolt Qty. 6

Assembly Description:

Assembly Note: The right and left pedals are appropriately marked (R) and (L). The threading orientation on the left pedal is

reversed from the threading orientation on the right pedal. To avoid stripping of the threads on the pedals or crank arms, make sure

to follow the proper assembly orientation.

A) Assemble the Right Pedal (#20) to the Right Crank Arm on the Main Base Assembly. Thread the pedal on the crank arm

(clockwise) and securely tighten with the pedal wrench (included). (Reference Figure #5)

B) Assemble the Left Pedal (#21) to the Left Crank Arm on the Main Base Assembly. Thread the pedal onto the crank arm

(counterclockwise) and securely tighten with the pedal wrench

(included).

C) Mount the Left & Right Foot Rest (#18 & #19) to the Main Base Assembly (#1) using 3-Button Head Allen Bolts (#29), 3

-Spring Washers (#23), and 3-Acorn Nuts (#24) per side

. (Reference Figure #6)

D) Mount the Bottle Cage (#35) to the Computer Mast (#6) using 2-Pan Head Screws (#26). Insert Sport Bottle (#36) into the

cage. ( Note: Washing the bottle before use is recommended)

Assembly Tip: Take time to review the additional information regarding computer operation, product maintenance, and warranty.

Congratulations !

You have successfully completed the assembly of this product and you are ready to start exercising toward a healthier lifestyle!

PAGE 8

Figure 5

Figure 6

® Right Pedal