Use and Care Manual

22
Lux Use, Care, and Installation Guide
LUX
ISLAND
DESIGNER
Features & Controls
Laminated Touch Controls
6. Recirculating Mode Reminder - Replace Charcoal Filter
► If this feature is enabled, after 200 hours of fan use, the indicator will illuminate. Press and hold
On/O, Light, and Fan for 3 seconds while the hood is o to enable this feature. Press and hold
On/O and Light for 3 seconds while the hood is o to reset the reminder.
7. Clean Grease Filter
► After 120 hours of fan use, the Clean Grease Filter indicator will illuminate. To reset the reminder,
press and hold On/O and Fan for 3 seconds while the hood is o.
8. Bluetooth®
► The Bluetooth® icon will illuminate when connected to the hood via Bluetooth®. To enable
Bluetooth® pairing mode, press and hold Fan for 3 seconds when the fan and lights are o.
9. Wi-Fi
► The Wi-Fi icon will illuminate for 30 seconds when the hood successfully connects or re-connects
to a network.
► When the hood fan or lights are powered on, the Wi-Fi icon will illuminate to indicate the
connection status. If it is not illuminated, it means the hood is not connected to the internet.
10. Remote Control Pairing Mode
► Press and hold Light for 3 seconds when the fan and lights are o to put the hood into
remote control pairing mode. Indicators will slowly blink while in pairing mode until the remote
synchronizes.