Manual

12
www.zephyronline.com
1. Remove baffl e fi lters by: 1) Pulling fi lter toward
front of liner. 2) Pivoting rear of fi lter down.
2. Remove grease tray by: 1) Pulling up on tray to
release from bottom panel. 2) Lifting tray out of
liner body.
3. (If applicable) Remove left and right side-spacer
panels by removing (2) screws from behind each
panel.
1
2
1
1
2
Locking Tabs
Bottom Panel Screws
2
1
4. Remove bottom panel by: 1) Removing (2)
screws from left and right sides of bottom panel.
2) Pulling bottom panel toward front of liner to
release from locking tabs.
6. Remove blower from liner by removing the (4)
3/16” x 3/8” screws from the top of the liner. Set
screws aside for later usage.
5. Disconnect blower molex plug.
Installation – Horizontal Ducting Preparation