Use, Care, and Installation Guide www.zephyronline.com Monsoon I AK9228AS AK9234AS AK9240AS AK9246AS Model number: Serial Number: Date of Purchase: Sales Dealer: JUL16.0601 © 2016 Zephyr Ventilation LLC.
www.zephyronline.
LIST OF MATERIALS ................................................................. 4 INSTALLATION Ducting Calculation Sheet ....................................... Mounting Height & Clearance................................ Ducting Options ........................................................... 6SHFL¿FDWLRQV ............................................................... Electrical ......................................................................... Cabinet Preparation & Installation ............
www.zephyronline.com Important Safety Notice READ AND SAVE THESE INSTRUCTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE CONTROL DEVICE. WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a. Use this unit only in the manner intended by the manufacturer, if you have questions, contact the manufacturer. b.
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. NOT FOR USE OVER AN OUTDOOR GRILL CAUTION 7R UHGXFH ULVN RI ¿UH DQG WR SURSHUO\ H[KDXVW DLU RXWVLGH 'R QRW YHQW H[KDXVW DLU LQWR VSDFHV ZLWKLQ ZDOOV FHLOLQJV attics, crawl spaces or garages. OPERATION $OZD\V OHDYH VDIHW\ JULOOHV DQG ¿OWHUV LQ SODFH :LWKRXW WKHVH FRPSRQHQWV RSHUDWLQJ EORZHUV FRXOG FDWFK RQWR KDLU ¿QJHUV and loose clothing.
List of Materials www.zephyronline.com PARTS SUPPLIED MODELS: AK9228AS, AK9234AS 1 - Liner hood body %DIÀH ¿OWHUV IRU $. $6 +DORJHQ OLJKW EXOEV SUH LQVWDOOHG ,QWHUQDO EORZHU SUH LQVWDOOHG 1 - 8” round adaptor w/damper 1 - 3 1/4” x 10” rectangular adaptor w/damper 2 - Horizontal ducting blower mount brackets 1 - Top rectangular cover plate 1 - Hardware package MODELS: AK9240AS, AK9246AS 1 - Liner hood body %DIÀH ¿OWHUV IRU $.
Duct pieces Total 1 Ft. x( ) = Ft. 6”, 7”, 8”, 10” 1 Ft. Round, straight x( ) = Ft. 3-1/ 4” x 10” Rect. 90 0 elbow 15 Ft. x( ) = Ft. 3-1/ 4” x 10” Rect. 45 0 elbow 9 Ft. x( ) = 3-1/ 4” x 10” Rect., straight Equivalent number length x used = Total 3-1/ 4” x 10” 5 Ft. Rect. to 6” round transition x( ) = Ft. 3-1/ 4” x 10” 20 Ft. Rect. to 6” round transition 90 0 elbow x( ) = Ft. 6” round to 1 Ft. 3-1/ 4” x 10” rect. transition x( ) = Ft. Ft. x( ) = Ft. 24 Ft. x( ) = Ft.
Installation – Mounting Height & Clearance www.zephyronline.com Minimum mount height between range top to hood bottom should be no less than 26”. Maximum mount height should be no higher than 36”. It is important to install the hood at the proper mounting height.
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside. Use single wall rigid metal ductwork only.
12 2 34 2-3/8 -3/ ”, 8” , 4 28-3 0- /8” 3/8 ” ” 3” 12” 2 40 8-3/8 -3/ ”, 8” , 4 34-3 6- /8” 3/8 ” /4 ” -1 19 Front (28”)14-1/4” (34“)17-1/4” (40”)20-1/4” (46“)23-1/4” (28”)9-1/4” (34“)12-1/4” (40”)15-1/4” (46“)18-1/4” elec. k/o C/L Top C/L *9- 7/8” Back *5-1/2” *3-1/4” *7- 3/4” * Dimensions for 28” and 34” model sizes only 8 (28”, 34”)Ø 7-3/4” (40”, 46”)Ø 9-3/4” 2” *1-1/2” (28”, 34”) 5-5/8” (40”, 46”) 5-7/8” 10-3/4” Installation – 6SHFL¿FDWLRQV www.zephyronline.
WARNING $OO (OHFWULFDO ZRUN PXVW EH SHUIRUPHG E\ TXDOL¿HG HOHFWULFLDQ RU SHUVRQ ZLWK VLPLODU WHFKQLFDO NQRZ how and background. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. Follow national electrical codes or prevailing local codes and ordinances.
! CAUTION: At least two installers are required due to the weight and size of the liner. If possible, power up and test all functions prior to installation. 5HPRYH DOO SDFNLQJ PDWHULDOV DQG SURWHFWLYH ¿OP SULRU WR LQVWDOODWLRQ Use caution during installation to prevent scratches or damage to the stainless steel. 2. Cut out an opening in the bottom of the cabinet by following the dimensions in FIG. 1.
1 1 2 2 1. 5HPRYH EDIÀH ¿OWHUV E\ 1) 3XOOLQJ ¿OWHU WRZDUG front of liner. 2) 3LYRWLQJ UHDU RI ¿OWHU GRZQ 2. Remove grease tray by: 1) Pulling up on tray to release from bottom panel. 2) Lifting tray out of liner body. 1 Bottom Panel Screws 2 Locking Tabs 4. Remove bottom panel by: 1) 5HPRYLQJ screws from left and right sides of bottom panel. 2) Pulling bottom panel toward front of liner to release from locking tabs. 3.
www.zephyronline.com Installation – Horizontal Ducting Preparation AK9228AS and AK9234AS Models Only 1 1 1 2 2 1. 5HPRYH EDIÀH ¿OWHUV E\ 1) 3XOOLQJ ¿OWHU WRZDUG front of liner. 2) 3LYRWLQJ UHDU RI ¿OWHU GRZQ 2. Remove grease tray by: 1) Pulling up on tray to release from bottom panel. 2) Lifting tray out of liner body. 1 Bottom Panel Screws 2 Locking Tabs 4. Remove bottom panel by: 1) 5HPRYLQJ screws from left and right sides of bottom panel.
Rect. ducting A Round ducting B A C B C 7. 8VLQJ D ÀDW KHDG VFUHZGULYHU UHPRYH ´ URXQG or 3 1/4”x10” rect. knock-out plates at the back of the liner. 8. Remove knock-outs A and B for rectangular ducting. Remove knock outs B and C for round ducting. At this point, install the one piece liner into the cabinet by following the steps on Page 10, Step 4. After the liner installation, continue to page 14. 9. Place top rectangular cover plate over opening on top of the liner.
www.zephyronline.com Installation – Horizontal Ducting Preparation AK9228AS and AK9234AS Models Only 10. (Rectangular Ducting) From inside the liner, push 3-1/4” x 10” rectangular adaptor through the back knock-out and secure to interior back ZDOO RI OLQHU ZLWK 0 [ PP VFUHZV 10. (Round Ducting) From inside the liner, push 8” round adaptor through the back knock-out DQG VHFXUH WR LQWHULRU EDFN ZDOO RI OLQHU ZLWK M4 x 6mm screws. 2 1 11.
Display (speed level, delay off, filter clean) Lights On/Dim/Off Adjust 6 Speed Levels 5 Min Delay Off 1. Blower On/Off By pressing the blower is switched on and off. When switched on, the blower starts up on speed level 1. ACT Verification - Airflow Control Technology (ACT) allows the installer to set the maximum blower CFM to align with local codes and regulations. - To verify the maximum blower CFM for AK9228AS and AK9234AS models: - With hood off, hold the button for 3-4 seconds.
Features & Controls – Touch Controls www.zephyronline.com Baffle Filter Clean Reminder Aa set of baffle filters are fitted by the factory, these baffle filters are intended to filter out residue from cooking. The filters need not be replaced on a regular basis but are required to be kept clean. The BaffleFilter Clean reminder function in the microprocessor will automatically indicate by a flashing F when the baffle filters need to be cleaned after every 30 hours of use.
SYNCHRONIZATION: To create a unique link between your liner and remote control please follow these steps: 1. With liner off, press and hold the “lights” button on the liner until the letter “F” shows on the display screen. 2. Press the “lights” button on the remote, the lights on the liner will turn on and synchronization is complete. RF REMOTE FUNCTIONS: Blower On/ Speed Selection 1 Blower On/ 2 Power Off 1 Blower On / Speed Selection Press to power on blower and cycle through all six blower speeds.
Maintenance – Cleaning and Installing Filters www.zephyronline.com SURFACE MAINTENANCE: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners. For heavier soil use liquid degreaser.
CAUTION: Light bulb becomes extremely hot when turned on. DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns. Make sure all power is turned off and bulbs are not hot. Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and falls out. ,I EXOEV DUH GLI¿FXOW WR WXUQ GXH WR SURORQJHG XVH ¿UPO\ DWWDFK WKH JODVV VXFWLRQ FXS SURYLGHG WR WKH EXOE RU use a rubber/latex glove and turn counter clockwise.
ACT Conversion www.zephyronline.com ALUÀRZ &RQWURO 7HFKQRORJ\ $&7 Some local codes limit the maximum amount of CFM a range hood can move. ACT allows you to control the maximum blower CFM of select Zephyr Ventilation range hoods without the need for expensive make up air kits. $&7 HQDEOHV WKH LQVWDOOHU WR HDVLO\ VHW WKH PD[LPXP EORZHU VSHHG WR RQH RI WKH PRVW FRPPRQO\ VSHFL¿HG &)0 levels; AK9228AS & AK9234AS - 290 or 390 CFM, AK9240AS & AK9446AS - 590 or 390 CFM.
USE ONLY TYPE MR16, GU10, 35 W. MAX.HALOGEN LIGHT BULBS. VOLTS HZ MAX AMPS 120 60 5 AK9228AS, AK9234AS CIRCUIT DIAGRAM b br r y g bu p w ACT 390 CFM - Fan Max. 355W @ 3.0A ACT 290 CFM - Fan Max. 255W @ 2.
www.zephyronline.com C Blower Fan Curve 600 CFM Model: AK92 (Monsoon I) AC Input: 120V, 60Hz Outlet Diameter: 8in Pressure (inAq) Fan Curve & Wiring Diagrams AK9228AS and AK9234AS Models Only 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.
Fan Curve & Wiring Diagrams AK9240AS and AK9246AS Models Only ACT 590 CFM - Fan Max. 556W @ 4.6A ACT 390 CFM - Fan Max. 381W @ 3.
www.zephyronline.
Issue Cause What to do After installation, the unit doesn’t work. 1. The power source is not turned ON. 1. Make sure the circuit breaker and the unit’s power is ON. 2. The power line and the cable locking connector is not connecting properly. 2. Check the power connection with the unit is connected properly. 3. The switch board and control board wires are disconnected. 3. Make sure the wires between the switch board and control board are connected properly. 4. The wires on control board are loose.
List of Parts and Accessories www.zephyronline.com DESCRIPTION PART # Replacement Parts /LJKW %XOE 05 *8 : HDFK = % %DIÀH )LOWHU /DUJH HDFK %DIÀH )LOWHU 6PDOO HDFK RF Remote Control 14000005 To order parts, visit us online at http://store.zephyronline.com or call us at 1.888.880.
Limited Warranty TO OBTAIN SERVICE UNDER WARRANTY OR FOR ANY SERVICE RELATED QUESTIONS, please call: 1-888-880-8368 Zephyr Ventilation, LLC (referred to herein as “we” or “us”) warrants to the original consumer purchaser (referred to herein as “you” or “your”) of Zephyr products (the “Products”) that such Products will be free from defects in materials or workmanship as follows: Three Year Limited Warranty for Parts: For three years from the date of your original purchase of the Products, we will provide,
www.zephyronline.com PRODUCT REGISTRATION Congratulations on your Zephyr range hood purchase! Please take a moment to register your new range hood at www.zephyronline.com/registration IT’S IMPORTANT Prompt registration helps in more ways than one. Ensures warranty coverage should you need service. Ownership verification for insurance purposes. Notification of product changes or recalls. Zephyr Ventilation | 2277 Harbor Bay Pkwy. 28 | Alameda, CA 94502 | 1.888.880.
