manual

14
www.zephyronline.com
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Cleanperiodicallywithwarmsoapywaterandcleancottonclothormicrobercloth.Alwaysrubinthe
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
Aftercleaninguseanon-abrasivestainlesssteelpolish/cleaners,topolishandbu󰀨outthestainlesslusterand
grain.Alwaysscrublightly,withcleancottonclothormicroberclothandbu󰀨inthedirectionofthestainless
steel grain.
Hybrid Ba󰀪e Filters
Thehybridba󰀪eltersinstalledbythefactoryareintendedtolteroutresidueandgreasefromcooking.
Theyneednotbereplacedonaregularbasisbutarerequiredtobekeptclean.
Removeandcleanbyhandorindishwasherusinganon-phosphatedetergent.Discolorationofthelter
mayoccurifusingphosphatedetergents,orasaresultoflocalwaterconditions-butthiswillnota󰀨ectlter
performance.Thisdiscolorationisnotcoveredbythewarranty.Spraydegreasingdetergentandleavetosoak
if heavily soiled.
Dryltersandre-installbeforeusinghood.
Removing Hybrid Ba󰀪e Filters
1.Pushinonspringloadedlterhandle.
2.Pulldownonlterhandletoremovelter.
Replacing Hybrid Ba󰀪e Filters
Part No. Qty. to Order.
50200050 2
Maintenance – Cleaning and Installing Filters