Installation guide

Maintenance – Lights

REPLACING LIGHT BULBS

CAUTION: Light bulb becomes extremely hot when turned on.

DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.

Make sure all power is turned off and bulbs are not hot.

Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and

falls out.

Ifbulbsaredifculttoturnduetoprolongeduse,rmlyattachaglasssuctioncupapproximatelythe

diameter of the bulb or use a rubber/latex glove and turn counter clockwise.

Replacementbulbsareavailableatspecialtylightingstores.PurchasetypeMR16(GU-10)35Whalogen.

For Zephyr part numbers please turn to page 15 of the manual.

Bottom View