Installation guide

www.zephyronline.com

Maintenance – Cleaning and Installing Filters

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,

or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine

bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless

lusterandgrain.Alwaysscrublightlyusingamicroberorcleancottonclothandwiththegrain.

Bafe Filters

Theltersareintendedtotrapresidueandgreasefromcooking.Althoughtheltersshouldneverneed

replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.

FiltersmaybeplacedindishwasheratlowheatorsoakedinhotsoapywaterDryltersandre-installbefore

using hood.

Installing Bafe Filters (FIG 4):

1. Placelterintotopgrooveofthepowerpackasshownand

pull towards front of power pack using handles.

2. Pivotbackoflterupwardssoitisangledinthepowerpack.

3.Pushlterintochannelonbackofpowerpacktolockintoplace.

Replacing/Ordering Bafe Filters:

Hood Model: Part No. Qty. to Order

AK8800Ax 50210010 2

FIG 4

CAUTION: If this hood is installed in a salt water area (example: coast),

rinse all surfaces once a week with clear water (even if the hood is not used), and wipe dry completely.