Recirculating Kit Manual

ZRC-0085

For use with models: AK8500AS

INCLUDED MATERIALS

MAR 21.0101

XP022643(1)

2277 Harbor Bay Pkwy

Alameda, CA 94502

1.888.880.8368

Place charcoal filter on back-

side of filter. And place filter

brackets over charcoal filter

and secure in place by

tucking each end of bracket

under the filter frame. Re-

install filter.

(1) return air vent

(1) charcoal filter

(4) return air

vent screws

(3) Brackets

Turn to next page for instructions

on installing return air vent.

PAGE 1
2277 Harbor Bay Pkwy Alameda, CA 94502 1.888.880.8368 ZRC-0085 For use with models: AK8500AS Place charcoal filter on backside of filter. And place filter brackets over charcoal filter and secure in place by tucking each end of bracket under the filter frame. Reinstall filter. INCLUDED MATERIALS (1) return air vent (4) return air vent screws (1) charcoal filter (3) Brackets Turn to next page for instructions on installing return air vent. MAR 21.
PAGE 2
ZRC-0085 Recirculating Kit Instructions To install the return air vent to top of the cabinet: (for installations where cabinet does not extend to the ceiling) 1. Cut a 6-1/2” round opening in top of the cabinet where the ducting will connect to the return air vent. FIG.1 2. Connect 6” round ducting from AK8500AS to return air vent collar. Return air vent collar will go around the ducing. Secure with duct tape. 3. Secure return air vent to top of cabinet with (4) screws.