manual

12
www.zephyronline.com
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/
scoring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and
grain.Alwaysscrublightlyusingamicroberorcleancottonclothandwiththegrain.
Aluminum Mesh Filters
Theltersareintendedtotrapresidueandgreasefromcooking.Althoughtheltersshouldneverneedreplacing,theyare
required to be cleaned every 30 days or more often depending on cooking habits.
FiltersmaybeplacedindishwasheratlowheatorsoakedinhotsoapywaterDryltersandre-installbeforeusinghood.
Installing Metal Mesh Filter, FIG 5:
1.PlacebackoflterintochannelonleftsideofPowerPack.
2. PulllterhandletowardsleftsideofPowerPack.
3.Pivotlterupandlockintoplace.
Hood Model: Part No. Qty. to Order
AK8400AS 50200055 1
3
FIG 5
FIG 6
2
1
1
2
3
Maintenance – Cleaning and Installing Filters