Use and Care Manual

16
www.zephyronline.com
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Cleanperiodicallywithwarmsoapywaterandcleancottonclothormicrobercloth.Alwaysrubinthe
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
Aftercleaninguseanon-abrasivestainlesssteelpolish/cleaners,topolishandbu󰀨outthestainlessluster
andgrain.Alwaysscrublightly,withcleancottonclothormicroberclothandbu󰀨inthedirectionofthe
stainless steel grain.
Stainless Steel Ba󰀪e Filters
Thestainlesssteelbafeltersareintendedtotrapresidueandgreasefromcooking.Althoughthelters
should never need replacing, they are required to be cleaned every 30 days or more often depending on
cooking habits.
FiltersmaybeplacedindishwasheratlowheatorsoakedinhotsoapywaterDryltersandre-installbefore
using hood.
Installing Ba󰀪e FIlters, FIG 4:
1. Placelterintotopgrooveofthepowerpackasshownand
pull towards front of power pack using handles.
2. Pivotbackoflterupwardssoitisangledinthepowerpack.
3.Pushlterintochannelonbackofpowerpacktolockintoplace.
Replacing Ba󰀪e Filters:
Hood Model: Part No. Qty. to Order
AK8200AS 50210010 2
AK8300ASX 50210010 3
1
2
FIG 4
3
Maintenance – Cleaning and Installing Filters