Use and Care Manual

17
Tornado II & Tornado III Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Features & Controls
1. Blower On/O
By pressing the blower is switched on and o. When switched on, the blower starts up on speed level 1.
2. Speed Selection
- Press to decrease fan speed. 3, 2, 1.
- If fan is on Speed 1 and is pressed, the fan will power o.
- Press to increase fan speed. Fan On, 1, 2, 3.
- If hood is o and is pressed, the fan will turn on speed 1.
3. Delay O
This feature is used for programmed shut down of blower 5 minutes after the function is activated. Pr
ess
once, a dot flashes in the lower right side of display indicating the function is on. The blower will
completely shut down after 5 minutes.
4. Lights Low/Medium/High/O
Switch lights on to low by pressing once, press a second time for medium, press a third time for high
and again to shut o lights.
5. Display Window
The display window indicates speed levels and features such as bae filter clean reminder, delay o and
clean air indicator.
Lights Low/Medium/High/O
5 Min Delay O
Display (speed level, delay o, filter clean)
Adjust 3 Speed Levels
Blower On/O
1
2
3
4
5
Touch Controls