Installation Guide

14
www.zephyronline.com
REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched o󰀨 and cooled. Touching hot bulbs could cause serious burns.
Makesureallpoweristurnedo󰀨andbulbsarenothot.
Removebyturningbulbcounterclockwise.Note: Bulb does not unscrew; it turns 60 degrees, stops and
falls out.
Ifbulbsaredi󰀩culttoturnduetoprolongeduse,rmlyattachaglasssuctioncupapproximatelythe
diameterofthebulborusearubber/latexgloveandturncounterclockwise.
Replacementbulbsareavailableatspecialtylightingstores.PurchasetypeMR16(GU-10)35Whalogen.
For Zephyr part numbers please turn to page 18 of the manual.
Maintenance – Lights