Installation Guide

13
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Cleanperiodicallywithwarmsoapywaterandcleancottonclothormicrobercloth.Alwaysrubinthe
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
Aftercleaninguseanon-abrasivestainlesssteelpolish/cleaners,topolishandbu󰀨outthestainlesslusterand
grain.Alwaysscrublightly,withcleancottonclothormicroberclothandbu󰀨inthedirectionofthestainless
steel grain.
Stainless Steel Ba󰀪e Filters
Thestainlesssteelbafeltersareintendedtotrapresidueandgreasefromcooking.Althoughthelters
should never need replacing, they are required to be cleaned every 30 days or more often depending on
cookinghabits.
FiltersmaybeplacedindishwasheratlowheatorsoakedinhotsoapywaterDryltersandre-installbefore
using hood.
Removing Ba󰀪e Filters
1. Pushltertowardbackofrangehoodusinghandles.
2. Pivotfrontoflterdownward.
3. Removelterbypullingawayfromhood.
Replacing Baffle Filters
Hood Model: Part No. Qty. to Order.
AK7836BS 50210026 3
AK7842BS 50210026 3
AK7848BS 50210027 4
AK7854BS 50210027 4
.
1
2
3
Maintenance – Cleaning and Filter Removal
CAUTION: If this hood is installed in a salt water
area (e.g. coast), rinse all surfaces once a week
with clear water even if the hood is not used.
Wipe and dry completely after rinsing.
!