Use and Care Manual

11
6.Attach8”roundductcollartobackofhoodbody
using(4)M4x8screws.
7. From inside hood body, position top cover plate
to top of hood body. From outside hood body,
attach top cover plate to top of hood body using
(4)3/16x3/8screws.
8. Connect single and dual blower PCB blower plug
andwhiteandblackpowercables.
Installation – Single Blower Horizontal Ducting Conversion
5. Position single blower with single blower plate
asshown.Besuretotuckbackofsingleblower
plateintotabsatbackofhood.Securesingle
blowerplatetobackofhoodusing(4)screws
removed from step 2.