Use and Care Manual

12
www.zephyronline.com
5. Place blower inside hood as shown. 6. Attach blower to hood body from the back of
hood using (4) previously removed blower
screws and reconnect blower plug.
7. Attach 8” round duct collar or 3 1/4”x10”
rectangular duct collar to back of hood body
using (4) M3.5 x 8 screws.
8. Attach top cover plate to top of hood body using
(4) 3/16 x 3/8 screws.
Installation – Horizontal Conversion