Owner's Manual

www.zephyronline.com

6. Attach 8” round duct collar or 3 1/4”x10”

rectangular duct collar to back of hood body

using (4) M3.5 x 8 screws.

7. Attach top cover plate to top of hood body using

(4) 3/16 x 3/8 screws.

8. Connect blower plug.

Installation – Single Blower Horizontal Ducting Conversion

5. Position single blower with single blower plate

as shown. Be sure to tuck back of single blower

plate into tabs at back of hood. Secure single

blower plate to back of hood using (4) screws

removed from step 2.