Recirculating Kit Manual

5
Installation – Charcoal Filters and Brackets
Mounting the Bracket and Bafe Filter
1. Insert the charcoal lter bracket into back side of bafe
lter (side without handles). The (2) tabs on the bottom
of the bracket should be inserted into the bafe lter
rst. Push the bracket towards the bafe lter to lock
bracket in place. There is a clip on top of the bracket
that will secure it to the bafe lter. (Fig. C) Repeat this
step for each bracket.
tab
tab
clip
Fig. C
Fig. D
Mounting the Bracket and Charcoal Filter
1. First insert the tab cut out on the charcoal lter onto
either side of the tab insert on the bracket, then clip the
self locking tabs onto the bracket.
2. Insert the charcoal lter into the bracket. Tab cut-out
side of the charcoal lter should be installed rst then
push down on the lter to lock in place. (Fig. D)