manual
Installation – Mounting the Range Hood
13
3UHSDUHGXFWORFDWLRQRQKRRGYHUWLFDORU
KRUL]RQWDO5HIHUWR3DJHIRUGXFWLQJ
options.
%HJLQLQVWDOODWLRQE\UHPRYLQJWKH¿OWHUVDQG
VLGHOLJKWSDQHOV)LJ
3. Reinforce cabinet with 1”x2” wood strips
if additional strengthening is required or if
cabinets are framed.
4. Temporarily position the range hood in the
desired mounting location. Measure and
mark the mounting holes, duct and electrical
locations with a pencil.
5. Drill/cut out the required openings for duct and
electrical access; make sure the duct opening
is large enough to apply duct tape.
)DVWHQKRRGRQWRFDELQHWZLWK0ZRRG
screws provided.
7. Install electrical.
8. Install duct work and seal with duct tape.
5HLQVWDOOWKH¿OWHUVDQGVLGHOLJKWSDQHOV
10. Power up hood and check for leaks around
duct tape.
11. If recirculating the hood refer to page 11 for
more details.
Hood is designed for installation under a
kitchen cabinet
9. Aluminum duc
tape
6. Duct
opening/
cutout
4. Add 1”x2”
wood
strips
2. Mesh
filters
8. Electrical
Fig 3
Push in on panel latch then pull panel down
Fig 4