Use and Care Manual

www.zephyronline.com

Installation – PBD-1200A Dual Blower

NOTE: To secure the 10” transition adapter to top of hood a cut out of 14 1/2” width x 10 1/2” depth will need

to be made in the cabinet bottom.

If internal cabinet dimensions prevent this size of a cut out then the 10” transition adapter may be mounted

to the cabinet bottom rather than the top of the hood. Cut out dimensions for this type of installation are

13 1/4” width x 6 1/4” depth.

9. Place 10” round adapter (included with PBD-

1200A) on top of hood and secure with (4)

M3.5 x 8 screws.

8. Connect blower wire extrension cable from

PBD-1200A kit to new blower. Connect both

blower plugs.

7. Dual Blower screw mount locations.