Owner Manual
20
Typhoon, Hurricane, & Cyclone Use, Care, and Installation Guide
TYPHOON, HURRICANE 
& CYCLONE
UNDERCABINET
CORE
Installation Instructions
Rectangular Horizontal Ducting Preparation
 Ź By default the Typhoon and Hurricane are pre-configured for 7” round vertical ducting. 
 Ź By default the Cyclone is pre-configured for 6” round vertical ducting.
1. Using a Philips-head screwdriver 
remove the screws and round vertical 
transition adapter from the top of the 
hood.
3. Typhoon ONLY. Remove the two 
plastic air diverter blocks. The blocks 
are located in the hood and can be 
accessed from the top when the round 
transition adapter is removed.
2. Using a Philips-head screwdriver, 
remove the screws and 3-1/4"x10" 
rectangular cover plate from back of 
hood.










