Use, Care and Installation Guide www.zephyronline.com Tempest I , II Stainless Steel Duct Cover AK0720 - 30” AK0726 - 36” AK0722 - 42” AK0728 - 48” JUN15.
SPECIFICATIONS —–—————————— 3 INSTALLATION ————————————— 4 CLEANING AND CONTACT INFORMATION ———————–- 5 1 Table of Contents LIST OF MATERIALS ————————–— 2
Note: If any parts are missing, please call 1-888-880-8368 for replacements.
For use with Tempest II AK7500 AK7536 AK7542 AK7548 30”, 36”, 42”, 48” 3 Specifications For use with Tempest I AK7000 AK7036
Installation 1. Line up screw holes and attach the left and right side panels to the center panel with screws provided. 2. Place assembled duct cover on top of hood. Make sure the screw holes of the center panel are facing down and line up with the holes on top of hood. 3. Attach the duct cover to the top of hood by securing the rest of the screws to it from within the inside of the hood.
When cleaning, use a non abrasive cleaner, do not use “orange” cleaner. Abrasive cleaners may scratch the surface and discolor the stainless steel. You may also polish the stainless steel by using stainless steel polish. Make sure when polishing to go along with the grain of the duct cover. Zephyr Ventilation 2277 Harbor Bay Parkway Alameda, CA 94502 888-880-8368 5 Cleaning and Contact Information Cleaning of the duct cover should be done frequently to preserve the life of the stainless steel.
