User's Manual

1.3 Operation System Composition

Operation System consisted of PC based Electronic Lock Management System (ELMS) software and RFID

Card.

System Requirements:

* OS: Windows XP/Windows7/Windows8/ Windows10, UNIX and LINUX.

* Electronic Locks Management System (ELMS)

* USB A-B cable

2. Operating Steps

1. Connect the DP700S to the USB port of the computer via a USB cable. Plug-and-play USB2.0 (HID

Protocol), no need to install any drivers.

2. Run the ELMS software as shown in the photo below

3. Place cards on the DP700S and follow the prompts to perform the appropriate card operation.