SDS

SAFETY DATA SHEET
ZEP POWER FOAM TUB & TILE
Version 1.0
Revision Date 03/30/2015
Print Date 04/13/2015
4 / 10
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Neutralize with chalk, alkali solution or ammonia.
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
To avoid spills during handling keep bottle on a metal tray.
Dispose of rinse water in accordance with local and national
regulations.
Do not breathe vapours or spray mist.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Keep away from oxidising agents and strongly acid or alkaline
materials.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory
equipment.
Hand protection
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye protection
:
Ensure that eyewash stations and safety showers are close to
the workstation location.
Tightly fitting safety goggles
Skin and body protection
:
impervious clothing
Choose body protection according to the amount and
concentration of the dangerous substance at the work place.