SDS

SAFETY DATA SHEET
POWER FOAM TUB & TILE CLNR 4 PACK
Version 1.2
Revision Date 10/26/2017
Print Date 09/17/2018
4 / 11
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Dispose of rinse water in accordance with local and national
regulations.
Do not breathe vapours or spray mist.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Keep away from oxidizing agents and strongly acid or alkaline
materials.
Do not store near acids.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Engineering measures
:
effective ventilation in all processing areas
Personal protective equipment
Respiratory protection
:
Use respiratory protection unless adequate local exhaust
ventilation is provided or exposure assessment demonstrates
that exposures are within recommended exposure guidelines.
Hand protection
Material
:
Protective gloves
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye protection
:
Access to clean water to rinse eyes must be available, options
include: eye wash stations or showers, or eye wash bottles
with pure water.
Tightly fitting safety goggles
Wear face-shield and protective suit for abnormal processing
problems.