SDS

SAFETY DATA SHEET
ZEP HVY DUTY FLR STRIPPER
Version 1.0
Revision Date 03/02/2015
Print Date 04/14/2015
4 / 11
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
Do not breathe vapours or spray mist.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Store and keep away from, oxidizing agents and acids.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
2-butoxyethanol
111-76-2
TWA
20 ppm
ACGIH
TWA
5 ppm
24 mg/m3
NIOSH REL
TWA
50 ppm
240 mg/m3
OSHA Z-1
TWA
25 ppm
120 mg/m3
OSHA P0
2-aminoethanol
141-43-5
TWA
3 ppm
ACGIH
STEL
6 ppm
ACGIH
TWA
3 ppm
8 mg/m3
NIOSH REL
ST
6 ppm
15 mg/m3
NIOSH REL
TWA
3 ppm
6 mg/m3
OSHA Z-1
STEL
6 ppm
15 mg/m3
OSHA P0