SDS

SAFETY DATA SHEET
ZEP COMM FOAMING WALL CLEANER
Version 2.1
Revision Date 11/18/2015
Print Date 11/19/2015
4 / 11
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.
Do not breathe vapours or spray mist.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Keep in a dry, cool and well-ventilated place.
Materials to avoid
:
Do not store near acids.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
butane
106-97-8
TWA
800 ppm
1,900 mg/m3
NIOSH REL
TWA
800 ppm
1,900 mg/m3
OSHA P0
propane
74-98-6
TWA
1,000 ppm
ACGIH
TWA
1,000 ppm
1,800 mg/m3
NIOSH REL
TWA
1,000 ppm
1,800 mg/m3
OSHA Z-1
TWA
1,000 ppm
1,800 mg/m3
OSHA P0
Personal protective equipment
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory
equipment.
Hand protection
Remarks
:
The suitability for a specific workplace should be discussed