Manualshelf

User`s guide

ManualsBrandsZEOS ManualsComputer equipmentPANTERA
51525354555657585960
60
5. Match the beveled Pin 1 corner of the SCSI host adapter
with the beveled Pin 1 corner of the socket. Carefully align
the SCSI chip in the SCSI host adapter socket.
6. Using two fingers, gently press the chip into the socket. Be
careful not to bend the pins.
7. Connect SCSI ribbon cable from SCSI port mainboard
connector (J8) to SCSI device. Make sure the red stripe is
toward pin 1.
8. Replace cover, reconnect all peripherals and monitor.
9. Turn on power as you normally would.
Chapter 8 - How to Install an Optional SCSI Controller Chip
Pin 1 on SCSI
Adapter Chip
Pin 1 on SCSI
Adapter Socket