User`s guide

58
8. How to Install an Optional
SCSI Controller Chip
To install an optional SCSI controller on your mainboard, you
must first install the SCSI chip and cable, then make software
changes to the system SETUP.
Note: Before starting, note your current system SETUP parameters. Access
SETUP by pressing F2 during boot, then choose the System
Information menu.
Hardware
1. Turn off the system power, unplug the AC power source,
and disconnect all peripherals and the monitor.
2. Remove system cover (see How to Open a Desktop Case,
earlier).
Caution:
Electrostatic Discharge can result in permanent damage to the equipment.
Always ground yourself by touching the system cabinet before beginning
the following procedure. We strongly recommend using an antistatic wrist
strap attached to cabinet ground.
3. Unpack the SCSI host adapter chip from the antistatic
package, being careful to handle it only by its plastic surface
(don’t touch the metal pins).
Chapter 8 - How to Install an Optional SCSI Controller Chip