User`s guide

5. Insert the bottom edge into the socket slot. Press down

firmly on the SIMM while maintaining the proper angle of

insertion.

6. Ensure the SIMM seats correctly. If not, remove and repeat

Step 5.

7. Gently push the top edge toward the retainer clips until the

clips snap into place.

8. Reinstall system cover.

After completing the installation, your ROM BIOS will

determine the amount of memory installed; however you may

need to change the CPU/DRAM Speed option in your system

SETUP program. Refer to Using SETUP earlier for detailed

instructions.

Inserting a SIMM

Chapter 6 - How to Add System RAM

Retaining clip