User`s guide

42
Advanced Menu
Warning!
Setting these items incorrectly could disable your system. Never needlessly
change from the defaults.
The Advanced Menu offers the following options:
Large Disk DOS Compatibility
Enables or Disables Logical Block Addressing, enabling you to
use very large IDE hard drives.
Note: Not implemented on all systems.
Integrated Peripherals
This menu allows you to set the addresses, interrupts and DMA
channels for your serial, parallel, and audio ports.
Com Port A:
When either Com Port 1 or Com Port 2 is set to Auto, the
system will automatically set the interrupts for both ports.
Otherwise this option allows you to set the interrupt and I/O
address of the COM1 serial port.
Com Port B:
When either Com Port 1 or Com Port 2 is set to Auto, the
system will automatically set the interrupts for both ports.
Otherwise this option allows you to set the interrupt and I/O
address of the COM2 serial port.
Chapter 3 - Using SETUP