User`s guide
45
Standby Break Events
When set to Auto, this enables the system to resume full speed operation
for as long as the specified IRQ is active. For example, this would allow
you to “wake up” a remote computer via its modem, which uses an IRQ.
You can set this parameter for 16 hardware IRQs, from IRQ0 to IRQ15.
Default: All IRQs set to Auto.
Standby Wakeup Events
When enabled, these return the system to full speed when you begin using
the keyboard or the mouse. It takes about six seconds for the CPU and the
monitor to wake up, and a few moments for the hard drive to resume full
speed from a standstill.
Keyboard
Returns the system to full speed when you begin using the keyboard.
Default: Enabled.
Mouse
Returns the system to full speed when you begin using the mouse.
Default: COM1 (IRQ4).
Exit Menu Options
Offers Exit and Save options for the SETUP program.
Chapter 3 - Using SETUP