Instruction Manual

6
B. A battery holder inside the battery chamber will spring up when
the battery chamber cover is opened fully. Insert the four batteries
into the battery holder, with polarities coincided to the plus (+) indi-
cations on the battery holder. Load all four batteries in the same
direction.
C. Upon loading the batteries into the battery holder, insert the bat-
tery holder into the battery chamber of the camera main body and
close the battery chamber cover with your finger.
* The battery holder can only be inserted one way because of its
shape.
If a red-colored battery check LED lights up outside the focusing
screen area (in the central front part of the finder), when the battery
check button is pressed, the batteries are loaded properly and there is
sufficient power for operations.
* If the LED does not light up, (1) the batteries are not loaded proper-
ly or (2) the batteries are used and should be exchanged for fresh
ones.
A. Push the battery chamber cover release button on the base of the
camera main body in the arrow-indicated direction and the battery
chamber cover will spring open.
1. Loading the Battery
The electronically controlled leaf shutter and the electro-magnetic shutter release system
will not work without loading the batteries. Four 1.5-volt alkaline-manganese (LR44) batter-
ies must be used.
* The batteries may be obtained at any photographic equipment or electrical appliance
dealer.
2. Battery Checking