Instruction manual

b. Utilize film back interchangeability and expose the frame after

removing the film back from the main body. Then, continue shooting,

according to "a". (See 3. Attachment and Removal of Film Backs.)

A. The focusing screen can be exchanged, depending on the type of

photographic work being undertaken. First, remove the finder

attached to the main camera body. Next, move the screen removal

levers on both sides in the arrow-indicated directions, as illustrated.

Then, using a pincer or similar tool, lift up the screen with the protru-

sion at the rear end.

B. To install the focusing screen, insert the protrusion at the rear end

of the screen in a corresponding groove on the main camera body.

Then, slide both screen removal levers forward to secure the focusing

screen.

* Seven types of focusing screens are available for the Zenza Bronica

SQ-Ai.

The film-winding crank assembly must be removed for attaching the Motor Drive SQ-I or

the Speed Grip S to the main camera body.

A. Lift up the release lever on the base of the film-winding crank

assembly.

24. Mirror Lock-Up (con’t)

25. Interchanging Focusing Screens

26. Removal and Attachment of the Film Winding Crank Assembly