Specifications

22
D. After adjusting the length of the neck strap, pass the leading end of
the strap through the buckle, as illustrated, which will fix it securely.
* There should be no slack in the strap between the buckle and the
plastic ring cover, or in "A" section, which means that both straps must
be of the same length at this point.
C. Next, thread the neck strap through the plastic ring cover and the
U-shaped ring and pull it out, as illustrated.
B. Next, insert the U-shaped ring into the slot of plastic ring cover.
The battery supplies power for the various electronic control mechanisms incorporated in
the Zenza Bronica ETRSi. When used incorrectly, there is a possibility of the wrong exposure
being set to the camera and/or the camera not operating.
Be sure to use and store the battery correctly for obtaining optimum performance from it at
all times.
Take the battery out of the battery chamber when storing the camera.
Leaving the battery in the camera for a long time, without using it, can lead to leakage prob-
lems and result in a poor contact. Discard a battery with leakage or corrosion and thorough-
ly clean out the battery chamber, before inserting the new battery.
24. Attachment of the Neck Strap
A. First, insert the U-shaped ring into the neck strap eyelet, as illustrat-
ed.
25. Facts About the Battery