Specifications

19
A. To make multiple exposures, first, rotate the film winding crank to
advance film, cock shutter and charge mirror action. Then, turn the
multiple exposure lever in a clockwise or arrow-indicated direction.
The shutter can be released and cocked any number of times, in this
condition, without advancing the film.
* The multiple exposure lever must be set before the first exposure, as
the film may move slightly if the multiple exposure lever is set after
the exposure.
B. When set for multiple exposure, a red warning indicator will appear
on the right-central area of the focusing screen.
C. Upon completing the multiple-exposed picture, be sure to return
the multiple exposure lever counter-clockwise back to its vertical
position. Otherwise, there will be an additional multiple exposure on
the same frame.
* The red warning mark will continue to appear on the focusing
screen unless the multiple exposure lever is returned.
To perform TTL automatic flash adjustments on the Zenza Bronica ETRSi, use the SCA300
System Grip Type flash unit and the SCA386 Adapter by connecting. To attach the SCA
adapter to the Zenza Bronica ETRSi, follow the instruction shown below. Flash units which
can be used: SCA300 System Grip Type flash units.
Use the Mounting Bracket in Combinations
Attach to the Adapter mounting area of the Mounting Bracket.
Use the Motor Winder Ei or Speed Grip E in Combination
Attach to the respective shoe.
20. Flash Photography (con’t)
21. Multiple Exposures