Specifications

18
A. Always use flash cords with a standard PC type plug (i.e., JIS
B7102).
* When detaching the flash cord, grip the plug firmly and pull it out
straight; never use a twisting action.
B. The lens shutter of the Zenza Bronica ETRSi has a X-setting for flash
synchronization, which means that electronic flash units will synchro-
nize at all shutter speed settings, up to the fastest 1/500 second.
Thus, it is very convenient for taking shots in daylight which require
flash fill-in, too.
C. When a special SCA adapter is used in combination with the Zenza
Bronica ETRSi, automatic flash adjustments are based on direct expo-
sure readings made at the film plane. When the electronic flash unit is
fully charged, a flash ready indicator will light up on the focusing
screen.
* See instructions supplied with the exclusive Bronica SCA System
Adapter.
19. Infrared Photography (con’t)
3. After focusing in the normal manner, re-set the distance indicated
by the green-colored distance index to the infrared index, by shifting
the distance ring. For example, if 5 meters is coincided to the green-
colored distance index, when the subject is focused on the focusing
screen, then, shift "5" to the red-colored infrared index which will
mean that the infrared film is focused at 5 meters.
4. Always follow instructions enclosed with the infrared film and fil-
ter regarding exposure conditions. To be on the safe side, make sev-
eral bracketing shots. In general, a slight over exposure rather than
under seems to be a good rule of thumb.
20. Flash Photography